Ground Location - Xiaomi MiniJ User Manual

Installation requirements
all electrical circuit and grounding must be setas per the national electrical standard.

Ground location

To minimize the vibration or unbalanced load, the wood floor has to be reinforced. The carpet and
the soft floor tile surface may cause vibration and slight movement of the washing machine in
operation.
Before you install the washing machine, select a location with the following characteristics:
◆ Do not position the washing machine on a platform or a structure with weak support.
"Adjusting the leveling leg" on page 10).
◆ A hard, level surface (if the surface is uneven, see
◆ Avoid direct sunlight, with adequate ventilation. (The washing machine shall not be installed in a
bathroom or a wet room.)
◆ Room temperature shall not fall below 0 ˚C.
◆ Away from sources of heat such as coal or gas stove.
Make sure that the washing machine does not stand on its power cord. Ventilation openings must
not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
16