D.installation Requirements; Power Supply; Water Supply - Xiaomi MiniJ User Manual

Installation requirements
all electrical circuit and grounding must be setas per the national electrical standard.

Power supply

◆ To avoid the unnecessary risk of fire, electric shock or personal injury, all electrical circuit and
grounding must be set as per the national electrical standard. It is the owner's responsibility to provide
proper maintenance on the electrical appliance.
◆ Do not overload the wall power socket or the extension cord. Otherwise, it may cause fire and
electric shock.
◆ Only the power cord equipped with the washing machine can be used.
◆ When ready for installation, ensure the power supply complies with the following items:Fuse or
breaker of 220V, 50Hz, 10A.When the heating function is used, the maximum current of the washing
machine may reach 10A. Ensure that your power supply unit (current, voltage and cable) can meet the
normal load requirements of the appliance.Use the State Grid. If you are not sure about the voltage,
contact with the manufacturer, product and service agent or qualified person.
◆ To guarantee your safety, use the three-core socket and check to ensure it is grounded accurately
and reliably. (The washing machine has been equipped with a three-core socket.)
◆ Protect the power cord.
◆ The power cord has to be positioned so that it will not be stepped on, pressed or clamped by the
article on or next to it. Pay special attention to the power cord of plug, socket and power cord contact
of the appliance.

Water supply

◆ The working water pressure of the washing machine is 0.05MPa~0.8MPa. When the water pressure
is below 0.05MPa, the water supply valve may not work normally, or the time of water supply is longer
than that of program control, and the display screen shows "SF".
14