Monacor VNC-3052 User Manual page 57

b. Snapshot: After enabling the snapshot function; the user can select the
storage position of the snapshot file, the interval time of the snapshot
and the reserved file name of the snapshot.
c. Interval: The interval between two snapshots.
3. I/O Setting
a. Input Setting:
The IP Cam supports input and output. When the input condition is
triggered, it will trigger the relay; and then send the video to mail
addresses /FTP server / SAMBA.
• Interval:
For example, if you select "10 sec" here, once the motion is
detected and the action is triggered, it cannot be triggered again
within 10 seconds.
• Based on the schedule:
57/74