Table of Contents
Advertisement
D. Event List
The IP Cam provides multiple event settings.
1. Event Setting
i. Motion Detection
To enable motion detection, please tick "Area 1/2/3". Click "Area
1/2/3" in Area Setting, and draw an area on the preview screen.
When motion in the area is detected, "Motion!" word will be marked
on the live screen, and the camera will send video or snapshot to
the specific mail addresses, trigger the output device, or save video
to FTP/ Micro SD card/ Samba.
If you select "save to SD card", the video or snapshot will be saved
to Micro SD card. If you also tick E-mail/ FTP/ Samba of "Log"
option, the motion detection log will be sent to E-mail/ FTP/ Samba
simultaneously.
• Interval: If you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10
seconds.
• Based on the schedule: When the option box is ticked, only during
the selected schedule time the motion detection is enabled.
53/74
Advertisement
Table of Contents
