1030 WLAN card
Note: This information is only for the user-replaceable modules.
For access, remove this FRU:
•
"1010 Base cover assembly" on page 63
Removal steps of the WLAN card
Note: The illustration is for WLAN card with WiGig function. For WLAN card without WiGig function, the
card has only two antenna connectors.
Step
Screw (quantity)
3
M2 × L2.5 mm, flat-head, nylon-coated (1)
When installing: Plug the gray cable into the main connector and the black cable into the auxiliary
connector. For WLAN card with WiGig function, also plug the WiGig cable into the 3rd connector on the card.
1040 WWAN card
Note: This information is only for the user-replaceable modules.
For access, remove this FRU:
•
"1010 Base cover assembly" on page 63
66
Hardware Maintenance Manual ThinkPad X1 Carbon and X1 Yoga
1
Color
Black
Torque
0.181 Nm
(1.85 kgf-cm)