Removing Uim Card; Installing Battery - Zte C S200 User Manual

5. Push the card until it clicks into position.
Notes:
The charger and other accessories should be disconnected from your phone before you insert or
remove the UIM card.
When inserting the UIM card, make sure that the metal contacts face downward and the cut corner is
at the top left.

Removing UIM card

1. Press and hold the End Key to power off the phone.
2. Slide down the cover.
3. Remove the battery. See Removing battery.
4. Remove UIM card gently from the card holder.

Installing battery

Notes:
The phone automatically switches off if the battery voltage is too low.
•
When not using the battery for a long period, remove it from the phone and store it in a cool dry place.
•
1. Press and hold End Key to turn off the phone.
2. Slide down the cover.
3. Insert the battery carefully with the contacts located against the gold springs.
4. Push down the battery until it clicks into place.
5. Place the battery cover onto the back of your phone.
4 Confidential and Proprietary Information of ZTE CORPORATION
ZTE-C S200 User Manual