Keypad Lock - Zte C S200 User Manual

ZTE-C S200 User Manual
but there may be enough power to power your phone on. You should use it up completely before charging
the battery for the first time. Charge the battery with the procedure indicated below.
1. Push down the USB port cover.
2. Insert the charger's USB adapter into the USB port.
3. Connect the charger to a standard AC wall outlet.
4. Remove the charger from both the wall outlet and the phone once the charging completed.
Notes:
Make sure that the adapter is inserted into the correct position. Do not force the connector into the port.
•
The battery will be fully charged for 3~4 hours.
•
Use the charger provided by the original provider. Using unapproved charger may cause danger and
•
violate the authorization and warranty rules of the phone.
If the phone is over-used in shortage of battery or not used for a long time, the screen may not display
•
the charge indicator until it is continues charged for 10 to 40 minutes.
For maximum battery performance, it is recommended that you completely charge the battery before
•
using the phone for the first time. A new battery's full performance is achieved only after three
complete charge and discharge cycles.
Once the charging is complete, remove the charger from both the power outlet and the phone.
•
To charge the battery, you can use the provided charger or the USB data cable.
•
Charging is only possible within a temperature range of -5℃ to +45℃.
•

Keypad lock

Use the keypad lock to prevent the keys from being accidentally pressed.
In standby mode, you can select OK Key [Menu] > Settings > Extras > Key Guard and set the keypad
locking automatically. Or cancel the keypad locking automatically.
If you want to unlock the keypad, press Right Soft Key [Unlock] firstly and then press * Key to unlock.
Confidential and Proprietary Information of ZTE CORPORATION 7