Starting Up; Inserting Uim Card; Removing Uim Card - Zte -C R200 User Manual

External Memory
Schedule
Voice Mail
Voice+Web Message
Note:
The indicators or icons on the information bar may appear according to network situation or need support
by the service provider.

Starting up

Inserting UIM card

You can obtain an UIM card from your service provider when you sign on as a subscriber.
Caution:
Do not bend or scratch your UIM card. Keep the card away from electricity and magnetism.
•
Don't touch the metal surface of the UIM card in case that information in the card may be lost or
•
destroyed.
Make sure to disconnect the charger and other accessories from your phone and remove the battery
•
before inserting and removing your UIM card.
1. Press and hold the End Key to power off the phone.
2. Slide down the battery cover and remove the battery.
3. Insert the UIM card into the card holder, with the metal contacts facing downward and the cut corner in
right direction. Make sure it is pushed all the way to the end as shown below.
4. Push the battery until it clicks into position.
5. Place the battery cover onto the back of your phone.
Notes:
The charger and other accessories should be disconnected from your phone before you insert or
remove the UIM card.

Removing UIM card

1. Press and hold the End Key to power off the phone.
4 Confidential and Proprietary Information of ZTE CORPORATION
Web Security
Web Message
Voice Privocy