Removing The Battery And Uim/Microsd Card; Charging The Battery; Powering On/Off - Zte D300 User Manual

D300 User Manual

Removing the Battery and UIM/microSD Card

1. Make sure that your mobile phone is powered off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
4. Pull the UIM card out and remove it from the mobile phone.
5. Press the microSD card. After the card clicks out, slide it down gently and remove it from the holder.

Charging the Battery

The new battery is not fully charged. To charge the battery, you need to:
1. Connect the adapter to the charger jack.
2. Connect the charger to a standard AC wall outlet.
3. Disconnect the charger when the battery is fully charged.

Powering On/Off

1. Make sure that your UIM card is in your device and the battery is charged.
2. Hold Power Key to power on your phone.
To power off your phone, hold Power Key.
Confidential and Proprietary Information of ZTE CORPORATION 9