Ta Function (Ta); Activating/Deactivating The Ta Function - Pioneer KEH-P7900R Operation Manual

A Title (English)

TA Function (TA)

The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source you are listening to. The TA function can be activat-
ed for either a TP station (a station that broadcasts traffic information) or an EON TP sta-
tion (a station carrying information which cross-references TP stations).

Activating/Deactivating the TA Function

1. Tune in a TP or EON TP station.
The TP indicator ("
station.
2. Activate the TA function.
The TA indicator ("
ments.
Repeat the preceding operation when no traffic announcement is being received to deacti-
vate the TA function.
Note:
• You can also switch the TA Function ON/OFF in the Function Menu.
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from sources other than tuner if the tuner was last set to the FM
band but not if it was last set to the MW/LW band.
• If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions
while listening to sources other than tuner.
• Only TP or EON TP stations are tuned in during the Seek Tuning mode when the TA indicator
(" ") is ON.
• Only TP or EON TP stations are stored by BSM when the TA indicator ("
") lights when the tuner is tuned to a TP station or an EON TP
") lights, indicating that the tuner is waiting for traffic announce-
" "
" "
") is ON.
20