LG LSP-400 User Manual page 13

STEP I. Check Components
? The following components are supplied Fixed Wireless Phone.
1. LSP-400Main Unit with Handset (Including inner backup battery)
2. Dipole Antenna
3. AC/DC Power Adapter
4. User Guide
? Please make sure that these components are present before you begin to install the
unit. If any of the components are missing or damaged, contact your service provider
immediately.
STEP II. Place the Terminal
? Place the unit on the stable flat surface area (desk, table, etc.). Serious damage may
result if the unit is dropped. Do not place the unit within 1 meter of heaters or
radiators.
This unit is designed for desktop usage. Avoid the direct exposure to sunlight and
dampness.
? Read the SAFETY INFORMATION located in the first part of this document before
you place the unit.
STEP III. Connect Components (Please refer to "Installation Steps" in 2.4)
? Connect the antenna to the TNC antenna connector located at the top of the unit. If
you have placed the unit on a flat surface, position the antenna upright.
? Connect the curl cord of the handset to the RJ-11 port located on the left side of the
unit.
? Connect the AC/DC Adapter cable to the DC input port located at the top of the unit.
?
If it is correct, a beep tone will be heard.
?
If it is not correct (Booting fails or beep tone is not heard), you will have to reconnect
the adapter or reset the battery switch to "on".
? Please observe the following to get better voice quality
1. Keep away from electrical appliances such as TV, computer, radio etc.
2. Keep the unit in a high and central location without any obstructions.
LGE CDMA Fixed Wireless Phone
LSP-400T User Guide
-1EA-
-1EA-
-1EA-
13
-1EA-