LGE CDMA Fixed Wireless Phone
LSP-400T User Guide
3. Basic Operations
3.1
Making a Call
You can make a call as follows.
1.
Pick up the handset or press
2.
Listen for dial tone.
3.
Enter the phone number with area code if needed.
4.
Wait for the Auto Time-out.
5.
The call is connected and you may start conversation.
6.
To disconnect the call, replace the handset or press
When the user presses the Dial/Flash button after dialing any desired number, if the
user picks up the handset or presses the Speaker Phone button, the phone makes a
call immediately.
3.2
3 way call conferencing
You can start tripartite conversation.
1.
Enter the phone number of the 2
conversation with 1
2.
Press Dial/Flash button.
This service should be provided by your service provider.
3.3
Call Wait
While a call is in progress, you may hear two beeps indicating another incoming call.
When call wait is enabled, you may put the active call on hold while you answer the other
incoming call.
1.
Press Clear or END/PWR button, Call Wait window then disappears.
2.
Press Dial/Flash button, you may start conversation with called number.
3.
Re-press Dial/Flash button, you may start conversation with previous number.
button.
nd
party phone while you are in telephonic
st
party.
16
button.