Ejecting a disc
You can specify a holder that you eject a disc
Press OPEN on the unit to display load-
The LCD panel opens halfway, and the load-
ing/ejecting menu is displayed on the screen.
! If the disc in the holder has already been
played, the disc type is displayed on the
holder icon (e.g. CD, DVD etc.).
! NO DISC is displayed for an empty holder.
Touch h next to the holder you want
to eject the disc from.
The disc is ejected.
# You can eject all loaded discs at once. To do
this, touch ALLh.
To cancel the all ejecting, touch CANCEL.
To replace the LCD panel to the original
position, press OPEN on the unit.
Adjusting the flap angle
You can adjust the flap angle as needed.
When adjusting the flap angle, be sure to follow
the procedures explained below. Forcibly adjust-
ing the flap angle by hand may damage it.
Press and hold OPEN button on the unit
to display the flap angle adjust menu.
Touch + or - to adjust the flap angle.
Each time you touch +, the flap comes out to-
ward you. Touching - moves the flap the other
! You can select from five positions for the
Black plate (21,1)
! The adjusted flap angle will be memorized.
The next time you eject or load discs, the
flap returns to the position where you set
Adjusting the volume
% Use VOLUME to adjust the sound level.
Press VOLUME to increase or decrease the
With the remote control, press VOLUME to in-
crease or decrease the volume.
Turning the unit off
% When using the touch panel keys,
touch the source icon and then touch OFF.
# When the source icon is not displayed, you
can display it by touching the screen.
# When using the buttons, press SOURCE and
hold until the unit turns off.
# To completely turn the display off, touch and
hold DISP. OFF. Refer to Using the common touch
panel keys on the next page.