Additional Information; Troubleshooting; Additional Information Troubleshooting - Pioneer Super Tuner III D AVH-P6850DVD Operation Manual

Additional Information

Troubleshooting

Common
Symptom
Power doesn't turn on.
The unit doesn't operate.
Playback is not possible.
No sounds are heard.
The volume level will not rise.
There is no picture.
The icon is displayed, and op-
eration is not possible.
The picture stops (pauses) and
the unit cannot be operated.
There is no sound.
Volume level is low.
There is audio and video skip-
ping.
The picture is stretched, the as-
pect is incorrect.
When the ignition switch is
turned ON (or turned to ACC),
the motor sounds.
Nothing is displayed.
The touch panel keys cannot be
used.
Cause
Leads and connectors are incor-
rectly connected.
The fuse is blown.
Noise and other factors are causing
the built-in microprocessor to oper-
ate incorrectly.
The disc is dirty.
The loaded disc is a type this unit
cannot play.
Non compatible video system disc
is loaded.
Cables are not connected correctly.
The unit is performing still, slow mo-
tion or frame-by-frame playback.
The parking brake cord is not con-
nected.
The parking brake is not applied.
The operation is prohibited for the
disc.
The operation is not compatible
with the disc's organization.
Reading of data has become impos-
sible during playback.
The volume level is low.
The attenuator is on.
The unit is not firmly secured.
The aspect setting is incorrect for
the display.
The unit is confirming whether a
disc is loaded or not.
The rear view camera is not con-
nected.
AV input 2 is at incorrect setting.
Black plate (103,1)
Action (See)
Confirm once more that all connections are
correct.
Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install the
correct fuse with the same rating.
Press RESET. (Page 11)
Clean disc. (Page 107)
Check what type the disc is.
Change to a disc compatible to your video
system.
Connect the cables correctly.
There is no sound during still, slow motion or
frame-by-frame playback.
Connect a parking brake cord, and apply the
parking brake.
Connect a parking brake cord, and apply the
parking brake.
This operation is not possible.
This operation is not possible.
After pressing g once, start playback once
more.
Adjust the volume level.
Turn the attenuator off.
Secure the unit firmly.
Select the appropriate setting for your display.
(Page 92)
This is a normal operation.
Connect a rear view camera.
Press V.ADJ to return to the source display
and then select the correct setting for AV
input 2. (Page 88)
<CRB2163-B>103
Appendix
103
En