Table of Contents
Advertisement
Note: The "Phone 2" port can be used to connect an additional phone, or cordless base station. All
telephones connected to the Phone Connect 4 will use the same telephone number.
Make a Test Call
Once you have connected a phone to the Phone Connect 4, make a call to confirm your service.
1. Use the connected phone to dial a phone number.
2. Wait a few seconds for the call to be connected.
Note: You will need to dial 10 digits (area code plus 7-digit phone number) even for local numbers.
Voicemail
Your Phone Connect 4 supports wireless voicemail. Follow the steps below to set up and use your
voicemail.
Voicemail Setup
1.
Dial *86 on any home phone connected to your device to be connected to your wireless
voicemail.
Your phone dials the voicemail access number.
2. Follow the system prompts to:
Create your passcode.
Record your name announcement.
Record your greeting.
Important: Voicemail Passcode – It is strongly recommended that you create a passcode when setting
up your voicemail to protect against unauthorized access. Without a passcode, anyone who has access
to your phone is able to access your voicemail messages.
Message Waiting
There are two indicators for a new message waiting: 1) the voicemail indicator
intermittent dial tone.
■
The voicemail indicator on your device flashes when a voicemail message is waiting. You will
also hear an intermittent dial tone on any connected phone handset before placing a call.
Retrieving Messages
1. To retrieve voice messages, dial *86 on any home phone connected to your device and wait
about few seconds to connect to your wireless voicemail box.
2. Simply follow the voice prompts to listen to and manage your messages. (Alternately, you may
dial your 10-digit home phone number to access your voicemail box.)
Basic Operations
; and 2) an
10
Advertisement
Table of Contents
