Charge The Battery; Turn Your Device On And Off; Resetting Your Device - Sprint WF723S User Manual

Charge the Battery

Follow these instructions to charge your device's battery using the AC adapter.
1. Insert the small end of the power adapter into the power socket of your device.
2. Plug the AC adapter into an electrical outlet.
3. After charging, disconnect the device from the charger.

Turn Your Device On and Off

The instructions below explain how to turn your device on and off.
Turn Your Device On
■
Slide the On/Off switch to the On position.
 Your device will power on. Depending on the indicators, you may use the device.
Turn Your Device Off
■
Slide the On/Off switch to the Off position.
 Your device will power off.
Your indicators will not be on while your device is off (unless the battery is charging).

Resetting Your Device

If your device malfunctions, it may be necessary to reset it to the factory default settings.
1. Remove the back cover.
2. Use a pin to press and hold the Reset button (shown below) for 3-10 seconds.
Set Up Your Device 7