Unclogging Spray Tip/Guard Assembly - Graco 24N950 Operation - Repair - Parts

Unclogging Spray Tip/Guard Assembly

Always perform Pressure Relief Procedure before
unclogging spray tip/guard assembly.
1. Perform Pressure Relief Procedure, page 10.
ti20183a
2. Reverse spray tip (X) to UNCLOG position.
X
ti20192a
3. Put prime/spray valve (D) DOWN to spray position.
D
ti20184a
4. Push spray button (A) to start field marker and clear
clog.
A
ti20212a
332119E
5. Push spray button again to stop field marker.
6. Perform Pressure Relief Procedure, page 10.
7. Rotate spray tip (X) back to SPRAY position.
X
ti20191a
8. Put prime/spray valve DOWN to spray position.
9. Push prime/spray button to start sprayer and resume
spraying.
10. If spray tip is still clogged, you may have to repeat
steps 1 - 9 several times.
11. If material still fails to be sprayed, perform Pressure
Relief Procedure, page 10.
12. Perform Tip Removal Cleaning, page 19.
13. Perform Filter Removal/Cleaning, page 11.
14. If applicable, perform CleanShot Cleaning, page 19.
Shutdown and Cleaning
17