Operating specifications
This section provides some general specifications for the XP10000. For
complete specifications, see the HP StorageWorks XP10000 Disk Array
Site Preparation Guide, available on the HP XP Disk Array web site:
http://h18006.www1.hp.com/storage/xparrays.html.
Temperature
Temperature range type
Recommended operating temperature
range
Operating temperature
Nonoperating temperature range
Shipping and storage temperature
(product packed in factory packing)
Temperature shock immunity (maximum
rate of temperature change)
Humidity
Protect the disk array from excessive humidity. You should not observe condensation
in or around the product under any conditions. There is no procedure for recovery
from moisture condensation
Humidity range type
Operating humidity range at 22
degrees C (71 degrees F)
Nonoperating humidity range
Shipping and storage humidity range
(product packed in factory packing)
Operating maximum wet bulb
temperature
Nonoperating maximum wet bulb
temperature
Shipping and storage maximum wet
bulb temperature
Range
21 to 24 degrees C, 70 to 75 degrees F
16 to 32 degrees C, 61 to 89 degrees F
–10 to +43 degrees C, 14 to 109 degrees F
–25 to +60 degrees C, –13 to +140 degrees F
10 degrees C per hour, 18 degrees F per hour
Noncondensing relative humidity (RH)
20% to 80%
8% to 90%
5% to 95%
26 degrees C (79 F)
27 degrees C (81 F)
29 degrees C (84 F)
HP StorageWorks XP10000 Disk Array
31