HP StorageWorks XP10000 Owner's Manual page 27

Item
Label
8 PS-ON
9
PS ENABLE
10
PS ON/OFF
Description
Indicator
LED
During normal operation,
(Green)
this LED should be on.
ON: The PS ON/OFF switch is
on. If the READY light is also on, the
disk array is ready to receive data.
OFF: The PS ON/OFF switch is off and
the disk array is not ready to receive
data.
Switch Used to enable the PS ON/OFF switch.
During normal operation, this switch
should be in the "Disable" position
(opposite the ENABLE position).
ENABLE: The PS ON/OFF
switch can be used.
DISABLE: The PS ON/OFF switch
cannot be used.
CAUTION:
Do not change the switch position
unless directed to do so by HP service
personnel.
Switch Used to power on/off the disk array.
During normal operation, this switch
should be in the ON position.The switch
functions only if the PS ENABLE switch is
in the ENABLE position.
CAUTION:
Do not change the switch position
unless directed to do so by HP service
personnel.
HP StorageWorks XP10000 Disk Array
27