Omron NS12 Quick Start Manual page 5

OMRON
Note
organization.
After entering the information, click the OK Button.
A dialog box confirming the registered information will be
displayed. Check the information and then click the OK Button.
7. The FinsGateway Units for which installation is possible can be
selected. ETN_UNIT and Serial Unit, which are already selected,
are required for transferring projects to the PT. Controller Link
Unit can be selected only if there is a Controller Link Board
mounted to the computer.
8. The screen for specifying the installation destination will be
displayed.
Specify the directory in which NS-Designer will be installed. The
following directory is displayed as the default installation
destination:
Windows 95, 98, or Me:
C:\Program Files\OMRON\FinsServer95
Windows NT, 2000, or XP:
C:\Program Files\OMRON\FinsServerNT
After specifying the directory, click the Next Button.
(The window will not be displayed if FinsGateway Ver. 3.0 has
been installed.)
9. The window to specify the folder in the Start Menu in which to
register a shortcut for the program will be displayed. Specify a
folder in the Windows Start Menu folder for creating a shortcut to
FinsGateway. The following folder is displayed as the default
location for creating shortcut keys:
Start Menu\Programs\Omron\FinsGateway
After specifying the folder, click the Next Button.
10. Installation will be executed. During installation, the installation
progress is displayed as a percentage.
11. When installation has been completed, the FinsGateway version
can be upgraded. Click the Yes Button to start the upgrade.
12. When installation has been completed, the Finished Window will
be displayed. Select whether or not to restart the computer
immediately, and click the Exit Button to complete the installation.
13. Always restart the computer after installation before using NS-
Designer!
To uninstall the FinsGateway or/and NS-Designer, please refer to
NS-Series Operation Manual (V074-E1-xx).
NS Series Quick Start Manual
Page 5