How To Install The Softwares - Omron NS12 Quick Start Manual

OMRON
1

How to install the softwares

Please read the following remarks before installing any NS software.
•
Do not install NS-Designer on a computer in which FinsGateway Ver. 2 and an
SLK, SNT, or SYSMAC Board are installed.
•
If NS-Designer Ver. 2.x, Ver.3.x, Ver.4.x , or Ver.5.x is already installed, a dialog
box to confirm deletion of this version will be displayed. Click the OK Button to
start deleting this version. To exit the setup program, click the Cancel Button and
then click the Exit Button. FinsGateway will not be uninstalled by this operation.
•
If FinsGateway Ver. 2 is already installed, always uninstall it before installing NS-
Designer. For details on uninstalling FinsGateway Ver. 2, refer to NS Series
Operation Manual (V074-E1-xx), page 2-6, section 2-2-3.
•
Before installing NS-Designer in Windows NT, 2000 or XP, log onto the computer
as the administrator to ensure that system DLL files can be overwritten. If
overwriting system DLL files fails, NS-Designer may not operate properly.
Installation Procedure:
1, 2, 3...
Page 4
1. Start up Windows 95, 98, NT, Me, 2000, or XP.
2. Close all applications before executing installation. Execute the
following files from the NS-Designer CD-ROM according to the
OS being used and then restart the computer.
Windows 95
a) Execute <CDROM>:\Update\401comupd.exe, and then restart
the computer.
b) Execute <CDROM>:\Update\DCOM\English\dcom95.exe, and
then restart the computer.
Windows NT , 2000 , or XP
Execute <CDROM>: \Update\401comupd.exe, and then restart
the computer.
Windows 98, 98SE or Me
No particular operations are required.
3. Place the NS-Designer CD-ROM in the CD-ROM drive. The setup
program is started automatically.
If the setup program does not start automatically, such as after
executing uninstall, locate Setup.exe in the CD-ROM using
Windows Explorer, and then double-click the file to execute the
setup program.
4. The NS-Designer Setup Wizard will be displayed. Install the NS-
Designer by following the instructions in the Setup Wizard.
5. A confirmation message for using FinsGateway Help may be
displayed. Click OK.
6. When installing FinsGateway, the window for registering user
information will be displayed. Enter the user name and
NS Series Quick Start Manual