Table of Contents
Advertisement
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish trusted connections between your phone and another
Bluetooth device. When you pair devices, they share a passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
Important
The phone supports the following Bluetooth profiles: Headset, Handsfree, A2DP, and AVRCP.
To pair your phone with another Bluetooth device:
Make sure that the Bluetooth device that you want to pair with is set to visible (or "discoverable") mode.
Important
Consult the Bluetooth device's documentation to learn how to set it to visible (or "discoverable") mode.
1.
Press
, and then tap Settings > Wireless controls > Bluetooth settings .
>
2.
Select the Bluetooth check box and tap Scan for devices . Your phone will start to scan for Bluetooth devices
within range and will display all detected devices below the Bluetooth devices section.
3.
Tap the Bluetooth device in the list to start pairing. (For example, a stereo Bluetooth headset.)
4.
The pairing and connection status will appear below the Bluetooth device name in the Bluetooth devices
list. When the other Bluetooth device is connected to your phone, the Bluetooth connected icon (
will appear in the status bar. You can now start using the Bluetooth device.
Pairing between two Bluetooth devices is a one-time process. Once pairing is created, the devices can
recognize the partnership and exchange information without entering a passcode again.
If you pair with a second headset while connected to the first, the first headset will be disconnected. To
switch connection back to the first headset, you must manually select that headset again in the Bluetooth
devices list.
Disconnecting a Bluetooth Device
1.
Press
>
2.
Navigate to the Bluetooth devices section, and then press and hold the connected Bluetooth device.
3.
Tap Disconnect .
– or –
Tap Disconnect & unpair if you want the phone to erase all pairing information with the hands-free headset
or car kit. You will be prompted to enter the passcode again when you connect to that Bluetooth device.
72
2I. Bluetooth
and tap Settings > Wireless controls > Bluetooth settings .
)
Advertisement
Table of Contents
