Pacific PRO 3 Operating & Maintenance Instructions

Portable extractor/spotter

Table of Contents

Download this manual

Portable Extractor/Spotter

INTRODUCTION

This operator's book has important information for the use

and safe operation of this machine. Read this book care-

fully before starting the machine. Keep this book and tell all

operators to read the book. If you do not follow the instruc-

tions, you can cause an injury or damage equipment, furni-

ture or buildings.

For new books write to:

Pacific Steamex, Inc.

2259 S. Sheridan

Muskegon, MI 49442-6252

Carefully inspect all components to ensure that there is no

concealed freight damage. If such damage is discovered,

file a "CONCEALED DAMAGE REPORT" immediately with

the delivering carrier.

PRO 3

OPERATING & MAINTENANCE

READ THIS BOOK

The contents of this manual are based on the latest product

information available at the time of publication. Pacific

Steamex reserves the right to make changes or improvements

to its machines without notice.

FOR YOUR CONVENIENCE, RECORD THE

FOLLOWING IMPORTANT INFORMATION:

MODEL

SERIAL NUMBER

PART NUMBER

DATE PURCHASED

INSTRUCTIONS

Table of Contents

Page 1 The contents of this manual are based on the latest product This operator’s book has important information for the use information available at the time of publication. Pacific and safe operation of this machine. Read this book care- Steamex reserves the right to make changes or improvements fully before starting the machine.
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS APPLIANCE! WARNING! To reduce the risk of fire, electric shock, or injury: Unplug from outlet when not in use and before servicing. Do not use outdoors. Protect the machine from rain. 3.
Page 3: Assembly And Operation
OPERATING INSTRUCTIONS WARNING! For the safe operation of this machine follow Place tool head on the surface to be cleaned, squeeze the instructions given in this booklet and the training given the solution valve lever on the tool assembly to start by your supervisor.
Page 4 PRO 3...
Page 5 PRO 3 PARTS LIST...
Page 6 PRO 3...
Page 7 PRO 3 PARTS LIST...
Page 8: Warranty Policy
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.