Table of Contents
Advertisement
Quick Links
Portable Extractor/Spotter
INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell all
operators to read the book. If you do not follow the instruc-
tions, you can cause an injury or damage equipment, furni-
ture or buildings.
For new books write to:
Pacific Steamex, Inc.
2259 S. Sheridan
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately with
the delivering carrier.
TRIUMPH
HEAT WAVE
Heated
OPERATING & MAINTENANCE
INSTRUCTIONS
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Pacific
Steamex reserves the right to make changes or improvements
to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL
SERIAL NUMBER
PART NUMBER
DATE PURCHASED
Advertisement
Table of Contents
Related Manuals for Pacific TRIUMPH HEAT WAVE
Summary of Contents for Pacific TRIUMPH HEAT WAVE
- Page 1 The contents of this manual are based on the latest product This operator’s book has important information for the use information available at the time of publication. Pacific and safe operation of this machine. Read this book care- Steamex reserves the right to make changes or improvements fully before starting the machine.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS APPLIANCE! WARNING! To reduce the risk of fire, electric shock, or injury: Unplug from outlet when not in use and before servicing. Do not use outdoors. Protect the machine from rain. 3. -
Page 3: Periodic Maintenance
OPERATING INSTRUCTIONS WARNING! For the safe operation of this machine follow NOTE: If foaming occurs, use a defoaming agent to the instructions given in this booklet and the training given prevent damage to electrical components. Water dam- by your supervisor. Failure to do so can result in personal age is not covered by the warranty. - Page 4 TRIUMPH HEAT WAVE FINAL ASSEMBLY...
- Page 5 TRIUMPH HEAT WAVE FINAL ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 258682 Recovery Tank Assembly, Blue 253441 Gasket, .125 Ensolite 253301 Ball & Float Assembly 255120 Latch w/ Keeper 962344 Screw, 8-32 x 1/2 FHP Zinc 962002 Screw, 10-32 x 1/2 Oval Head 253439 Gasket, .125 Ensolite...
- Page 6 TRIUMPH HEAT WAVE FLOAT ASSEMBLY...
- Page 7 TRIUMPH HEAT WAVE FLOAT ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 253301 Ball and Float Assm-Complete 252406 Cap-Ball Float Cup 253801 Grommet-Float Shut Off 251308 Ball-Float Shut Off 253439 Gasket-.125 Ensolite...
- Page 8 TRIUMPH HEAT WAVE HAND TOOL ASSEMBLY PARTS LIST PART NO. DESCRIPTION QTY. 258807 Hand Tool-4" Aluminum Detail 219401 Valve Assembly-400PSI 255704 Jet-Spray 254141 8' Vac & Sol Hose Assembly 254122 Hose-Vacuum Assembly 8' S267P6 Cuff-Vac Hose 254117 Hose-Solution 8' 203308 Quick Connect-Female 1/4"...
- Page 9 TRIUMPH HEAT WAVE WIRING DIAGRAM...
-
Page 10: Warranty Policy
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.