Advertisement
HOW TO CLEAN / FEATURES (CONT.)
CLEANING WITH THE HAND TOOL
(CONT)
7. Position the HAND TOOL well in front of
the area or stain you want to deep clean.
8. Squeeze the "SPRAY" trigger on the
handle to begin cleaning. (Fig. 29)
(Fig 29)
9. While squeezing the trigger, move the tool
back and forth over the area you want to
clean, making sure to press the suction
nozzle down into the surface. (Fig. 30)
(Fig 30)
10. Release the "SPRAY" trigger when area
is cleaned. Excess water can be removed
by making additional passes with the tool
without squeezing the "SPRAY" trigger.
This may allow faster drying.
11. Leave the machine on for 15 seconds
after cleaning to allow for all of the dirty
solution to be collected into the WASTE
WATER TANK.
EMPTYING THE WASTE WATER
TANK
See instruction on Page 8
REFILLING THE CLEAN WATER
TANK
See instruction on Page 8
12
01903 235558
rugdoctor.co.uk
STORING THE UPHOLSTERY TOOL
ON THE TOOL CADDY
1. The Tool Caddy is labelled so you can
wrap the upholstery tool hose securely
for storage. See the comprehensive
instructions on wrapping the tool caddy
on page 5. (Fig. 31)
(Fig 31)
2. The TOOL CADDY can be easily removed
and replaced on the unit. Simply lift up to
remove. To replace back on the unit, align
the connection hooks on the back with
the connection inlets on the back of the
HANDLE and push down to secure.
(Fig. 32)
(Fig 32)
CLEANING UP/STORAGE AFTER USE
After you've used your RUG DOCTOR DEEP
CARPET CLEANER Upholstery Tool follow
these easy steps for quick clean-up and
storage for your machine.
1. Turn the machine off by pressing the
POWER SWITCH down toward the "OFF"
setting.
2. Turn off the mains socket switch. Unplug
the MAINS POWER CABLE from the mains
socket and wrap it around the ROTATING
CABLE HOOKS.
3. Empty the CLEAN WATER TANK (if
necessary), rinse, dry and replace on the
machine.
4. Empty the WASTE WATER TANK then
rinse, clean and dry before placing back
on the machine base. The WIDE OPENING
LID is designed to allow your hand to get
inside in order to thoroughly clean, rinse
and dry so you are storing a fresh and
clean tank. (Fig. 33)
(Fig 33)
5. Ensure that the black rubber flap is
pressed firmly back into the WASTE
WATER TANK to form a seal.
6. Wheel the machine to a cupboard or other
indoor storage place. Use the HANDLE
RELEASE lever to fold down the HANDLE
for convenient and compact storage.
(Fig. 34)
(Fig 34)
13
rugdoctor.co.uk
01903 235558
Advertisement
