Call Control Settings; Set-Up Do Not Disturb; Set Outgoing Calls Control - BT 8600 Quick Setup And User Manual

Call control settings

To enter the Call control menu you need to enter your access PIN. This will need to be set the first time
you try and enter the menu, simply follow the on screen instructions. If you have already changed the
remote access PIN when setting your remote access then you will not need to set it again as this PIN
is used for both Call control and Remote access.

Set-up Do not disturb

Do not disturb allows calls to be received silently with minimal notification. The default is off.
1. In idle mode, press
2. Enter the access PIN and select
3. Press or to select On, Off or Timed. If you select Timed you need to select the on and off times you
want, press and enter the on time, then
highlight whether you want VIP calls to be Allowed or Barred using
setting will be displayed and you will hear a confirmation tone.
When set to On, the idle screen will display DO NOT DISTURB instead of the handset name. For more
information and general advice on handling unwanted calls please go to bt.com/unwantedcalls

Set Outgoing calls control

1. In idle mode, press
2. Enter the access PIN and select
press Select.
3. Mobile calls is highlighted. Press
calls, then press
option displayed and then select OK. The display will show Outgoing calls settings
saved. You will then be prompted to add some VIPs if you haven't already
assigned any.
.
. Scroll
.
. Press
or to select Allowed or Barred for Mobile
to International and follow the same procedure for each
to Do Not Disturb and press Select.
again and enter the off time. Press
or
to highlight Outgoing calls and
to
, then press Save. The chosen
Outgoing calls
Mobile calls
< Allowed
International
Allowed
Save
25
>
Back