Set The Message Alert On Or Off; Remote Access; Set The Remote Access Pin For The First Time; Change The Remote Access Pin - BT 8600 Quick Setup And User Manual

Set the message alert on or off

1. Select Menu, Answer Phone is displayed, press Select.
2. Press until Settings is displayed, press Select.
3. Press to highlight Ans. & record and press Select.
4. Press to display Message alert and then press
select On or Off and select Save. Saved will be displayed.
When the message alert is set to On, the base will beep at regular intervals. The default setting is On.

Remote access

With remote access you can operate your answer machine from any Touchtone™ phone, even if you
forget to turn on your answer machine before you go out. You need to set a remote access PIN first and
then you will need to turn remote access On if you want to use this feature. The PIN is also used for the
Call Control PIN.

Set the remote access PIN for the first time

1. Select Menu, Answer Phone is displayed, press Select.
2. Press until Settings is displayed, press Select.
3. Press to highlight Remote access and press Select.
4. Read the message prompt, press
5. Enter a 4 digit PIN of your choice and select OK.
6. Enter the 4 digit PIN again to confirm and select OK. The display will show Access PIN saved.

Change the remote access PIN

1. Select Menu, Answer Phone is displayed, press Select.
2. Press until Settings is displayed, press Select.
3. Press to highlight Remote access and press Select.
4. Press to highlight Change PIN and press Select. You will be reminded that the access PIN is used
for both remote access and call control.
or
to read it all, then select Set PIN.
to
Using the phone 37