Additional Programme Settings26; Speedperfect; Ecoperfect; Water&Rinse - Bosch WAT Series Instruction Manual And Installation Instructions

Additional programme settings
en
\
Additional programme
settings
You can find an overview of all of the
A d d i t i o n a l p r o g r a m m e s e t t i n g s
additional settings that can be selected
depending on the programme on the
printed supplement to the installation
and operating instructions.

SpeedPerfect

Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the SpeedPerfect setting.
Do not exceed the maximum
Note:
load.

EcoPerfect

Eco
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
EcoPerfect setting.
Water&Rinse+
ë
Adjustment values:
+1 + 1 rinse
+2 + 2 rinses
+3 + 3 rinses
off Setting deselected
Higher water level and additional rinse
cycles depending on the programme,
longer programme duration for
particularly sensitive skin and/or for
areas with very soft water.
26

Prewash

T
For heavily soiled laundry.
Pour detergent into
Note:
compartments I and II.

Easy-Iron

Q
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
The washing's residual moisture
Note:
is increased.

Rinse hold

$
If final spinning is not selected, the
laundry will remain in the water after the
final rinse.
You can select "Rinse Stop" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.
To continue/end the programme
~ Page 31