Deleting Stored Files; Deleting One; Deleting All; Protecting Files - Jenoptik JDC 3.0S User Manual

REVIEWING YOUR FILES

DELETING STORED FILES

Note: Once file is deleted, it cannot be recovered.
Deleting One File
1. When the file to be deleted is shown on the LCD, press the Menu button.
2. Press or button to highlight Erase.
3. Press the or
button. The file will be deleted in a few seconds.
Deleting All Files
1. Press the Menu button
2. Press or button to highlight Erase.
3. Press the or
pictures and video clips will be deleted.

PROTECTING FILES

To prevent important pictures or video clips being accidentally erased, you may lock the file by
following steps below:
1. Find out the file to be protected. (p. 16)
2. Press the Menu button.
3. Press or button to highlight Erase.
4. Press the or
button. The selected file will be locked. A lock icon will be shown on the
upper left corner of the file.
5. Repeat steps 1-4 above to protect other files.

FORMATTING THE INTERNAL MEMORY OR SD CARD

Caution:
1. Formatting will delete all pictures and video clips from the memory.
2. During the formatting process, never remove the memory card or batteries, as it will damage
the card and/or the camera.
3. When a memory card is not inserted into the camera, selecting the formatting function will
format the internal memory instead. All pictures and video clips stored in the internal memory
will be deleted.
1. In Review mode, press the Menu button
2. Press or button to highlight Erase.
3. Press the or
button. The internal memory or SD card will be formatted in a few seconds.
The LCD shows "No File Exist".
button to highlight One, and then press the Menu
button to highlight All, and then press the Menu button. All unprotected
button to highlight Protect, and then press the Menu
button to highlight Format, and then press the Menu
17
Erase
Cancel
One
All
Format
Protect
Erase
Cancel
One
All
Format
Protect
Erase
Cancel
One
All
Format
Protect