Resetting The Microprocessor; Eng/Master - Pioneer RS-D7R Owner's Manual

Before Using This Product

Resetting the microprocessor

The microprocessor must be reset under the following conditions:
• When using this unit for the first time after installation.
• When the machine fails to operate properly.
• When strange (incorrect) messages appear on the display.
1. Remove the covering.
Hexagonal wrench
2. Press the RESET button on this unit with a supplied hexagonal wrench.
RESET button
3. Replace the cover to assure the reset button is not accidentally pressed.
The cover may be attached vertically or horizontally.
10

ENG/MASTER 96

Screw
Hexagonal wrench
10
Covering