Setting The Equalizer Curve - Pioneer RS-D7R Owner's Manual

Audio Adjustment <Equalizer>

Setting the equalizer curve

• You can switch between the left/right combine mode and left/right independent mode at
any time. So even when using the left/right independent mode, you can switch to the
left/right combine mode to perform adjustments.
1. Open the cover of the remote control in the equalizer menu
(refer to page 5).
This switches to equalizer menu setting screen.
2. Press the FUNCTION button 5 to select the 3-band parametric equalizer
mode.
3. Press the FUNCTION button 1 for two seconds and switch between
left/right independent mode (L/R) and left/right combine mode (COM).
4. Press the FUNCTION button 1 and select left or right channel.
(Only for L/R mode.)
Each press the FUNCTION button 1 switches left and right channel.
Note:
• Even when using the left/right combine mode you can switch to display left and right channels, but
adjustments are those performed in the left/right combine mode.
5. Press the FUNCTION button 3
and select the desired band to be
adjusted.
Each press the FUNCTION button 3
switches to next band.
6. Press the 2/3 buttons and select
the desired frequency to be
adjusted.
Note:
• You cannot set the intervals of the adjacent 2 bands to less than 1/3 of an octave.
7. Press the 5/∞ buttons and
adjust the level.
26
ENG/MASTER 96
26