Connecting The Power Cord - TAD -M600 Owner's Manual

Connecting the power cord

Once all connections have been made, plug in the power cord to a power outlet (AC 120 V).
• Although the power cord to the TAD-M600 is removable, do not attempt to use a power cord
other than the supplied cord.
• Connect the power plug to a power outlet and turn the power switch on to power up the TAD-M600. Upon power up, there
will be an eight second mute period. While muted, the power indicator will light red. The power indicator will turn yellow
once the TAD-M600 is ready to be operated.
• When not using the TAD-M600 for a long period of time (due to travel or other reasons), be sure to unplug the power cord
from the power outlet.
• Always turn the power switch off before unplugging the power cord to the TAD-M600.
How to connect the power cord
1. Connect the supplied power cord to the AC IN connector of the TAD-M600.
2. Connect the power plug to a power outlet (AC 120 V).
TAD-M600
CAUTION
As the TAD-M600 has high power consumption, be sure to connect the plug to a power outlet providing sufficient electrical
'
capacity. (Connecting to a power outlet with low electrical capacity could result in abnormal heating of the plug connection.)
Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when
'
your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other
object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The
power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you
an electric shock. Check the power cord once in a while. If you find it damaged, ask your dealer for a replacement.
INPUT
(BALANCED)
SPEAKERS
A B
CLASS 2 WIRING
1
Power cord (2-pin) (supplied)
Power outlet
Wider opening
2
TAD-M600
13