TRENDnet User's Guide
Button
Action
Sync
Sync /
Push/hold for 3
Reset
seconds,
(see the
then release
section
Using the
Sync Button
Reset
for
instructions)
Push/Hold for 10
seconds,
then release
Power Prong – Plugs into an available power outlet.
Diagnostic LEDs – Indicates the device status and connectivity.
© Copyright 2016 TRENDnet. All Rights Reserved.
Function
Initiate Sync/Connection and generate random
network name/key (DATA LED will go off then
return to solid after connection is made).
Note: The secondary or additional Powerline
adapter's Link button must also be pushed within 2
minutes (120 sec) of pushing the Link button on the
first adapter in order to establish connectivity.
Reset device to factory defaults (All LEDs will turn
off and turn back on).
Note: Will reset to the factory default private
network name "HomePlug AV".
LED
Color
Sequence Definition
Green
On
POWER
N/A
Off
Green
On
ETHERNET
N/A
Off
On
DATA
(Powerline)
Green
Blinking
N/A
Off
Note: The following factors may affect the Powerline network's connection quality:
Noise – Generated by appliances which use your electrical system (e.g.
Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your
household electrical wiring may also cause additional noise on your electrical
system.
Distance – Long lengths of electrical wiring through your electrical system
between connected Powerline adapters.
Power Saving: The device will automatically reduce power usage when the connected
device via Ethernet is powered off, unplugged or inactive for more than 5 minutes. The
device will return to active mode when the connected device via Ethernet is powered on
and the link is active.
Note: This device offers EU compliant Standby mode functionality. To turn off the device,
unplug it from the power outlet.
TPL‐407E / TPL‐407E2K
Device powered on
Device powered off
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) connected
Port disconnected/no Ethernet link
Powerline connected
Syncing or Powerline data
transmitting/receiving (Connection quality is
Best)
Powerline is not synced or connected
3