Controls And Displays; Front Panel - Pioneer BDP-LX 70 Operating Instructions Manual

Controls and displays

Chapter 3
Controls and displays

Front panel

1
1  STANDBY/ON
Press to switch the player on (the power indicator and indicator in
the middle of the unit light up when the power is on) or into standby.
2 Disc tray
3  OPEN/CLOSE
Press to open or close the disc tray.
4 Indicators
• FL OFF – Lights when the display and other indicators are
switched off.
• HD – Lights when the video output is 720p, 1080i or 1080p
(HDMI), or 720p or 1080i (component).
• LAN – Lights when there is an active local area network (LAN)
connection.
• HDMI – Lights when a device is connected via HDMI.
5 Display
Shows disc status and playback information.
2 3
6
Press to start or resume playback.
7
Press to stop playback (you can resume playback by pressing ).
8
Press to pause playback. Press again to restart.
9
•  – Press to jump to the next chapter, track, etc. Press
•  – Press to jump back to the beginning of the current
10 OUTPUT RESOLUTION
Press to switch the output resolution over HDMI and component
video outputs. See Changing the output video resolution on page 12.
4 5
10 9 8



Skip/scan buttons
and hold for fast forward scanning.
chapter, track, etc. then to previous chapters, tracks, etc. Press
and hold for fast reverse scanning.
7 6
03
15
En