Controls And Displays; Front Panel; Front Panel Display - Pioneer BDP-LX70A Operating Instructions Manual

Chapter 3
03

Controls and displays

Front panel

1
 STANDBY/ON
1
Press to switch the player on (the power indicator and indicator in
the middle of the unit light up when the power is on) or into standby.
2 Disc tray
 OPEN/CLOSE
3
Press to open or close the disc tray.
4 Indicators
• FL OFF – Lights when the display and other indicators are
switched off.
• HD – Lights when the video output is 720p, 1080i or 1080p
(HDMI), or 720p or 1080i (component).
• LAN – Lights when there is an active local area network (LAN)
connection.
• HDMI – Lights when a device is connected via HDMI.
5 Display
Shows disc status and playback information.

Front panel display

1 
Lights during playback of a disc.
2 Character display
Shows various playback information — disc time, chapter and title
number, etc.
3 NTSC
Lights when the video output signal format is NTSC.
16
En
2 3
1
4
10
 (play)
6
Press to start or resume playback.
 (stop)
7
Press to stop playback (you can resume playback by pressing ).
 (pause) (pause)
8
Press to pause playback. Press again to restart.
9 Skip/scan buttons
•   – Press to jump to the next chapter, track, etc. Press
and hold for fast forward scanning.
•   – Press to jump back to the beginning of the current
chapter, track, etc. then to previous chapters, tracks, etc. Press
and hold for fast reverse scanning.
10 OUTPUT RESOLUTION
Press to switch the output resolution over HDMI and component
video outputs. See Changing the output video resolution on page 12.
2
5
9 8 7 6
L
3