Table of Contents
Advertisement
Speech Processing
Q.: Can I program all Dragon commands on my SpeechMike buttons?
A.: SpeechControl4Mac offers the most important functions for Dragon Dictate 5 in its feature set.
Specific macros or commands cannot be programmed to the SpeechMike buttons.
Please use the spoken commands instead.
Q: Will it be delivered automatically with the HW?
A.: No, SpeechControl4Mac can only be downloaded from the
Q: Will it be possible to configure the Digital Pocket Memo (DPM)?
A.: SpeechControl4Mac can configure Philips SpeechMikes III and SpeechMike Premium only.
Q: Can you set the buttons to toggle / continuous
A.: Yes, this can be done with the "button pressed" and "button released" event.
Q: What versions of Dragon Dictate does SpeechControl4Mac work with?
A.: SpeechControl4Mac 3.3 works with Dragon Dictate 5.
Q: How much does this tool cost?
A.: There is no extra charge for SpeechControl4Mac.
Q: Where can we get this tool from? Is it on the web?
A.: SpeechControl4Mac can be downloaded from the
Q: Can existing SpeechMike users obtain the tool from our web site at no extra cost?
A.: Yes, it is downloadable for SpeechMike III and SpeechMike Premium from the
support
site.
Q: Is there a minimum SpeechMike firmware version required for version use on a Mac?
A: Yes, SpeechMike III requires firmware V1.14 or later. In case a SpeechMike III with an older
firmware is connected you will be asked to upgrade your firmware.
If you click "Upgrade" SpeechControl4Mac will upgrade the SpeechMike III firmware to version 1.14.
Q: Does it matter in which order Dragon Dictate 5 or SpeechControl4Mac are installed?
A: The installation order does not matter.
If Dragon Dictate 5is already there you can also install SpeechControl4Mac afterwards and all works
fine.
Back to
Table of Contents
Solutions
Workbook
SpeechControl4Mac 3.3
SpeechMike support pages
Philips Speech Processing download
24 of 28
Page:
area.
SpeechMike
Advertisement
Table of Contents
