Philips SpeechControl4Mac Workbook page 10

Speech Processing
DEVICE CONFIGURATION
General
On the Device page you can customize the behavior of the active device, configure its buttons and
upgrade its firmware. After starting SpeechControl, the current
automatically loaded and displayed in the UI.
You can also load the settings from the device manually by clicking the
After changing the settings in the UI, you can save them to the device by clicking the
button.
By clicking
the UI.
After that, click Save to device
D Note:
It is not possible to configure more than one connected device at once. When connecting a
second device to your Mac, it automatically becomes the active, configurable device.
Following settings are available on the Device page:
D Note:
The availability of the above settings depends on the type of the active device.
Solutions
, the factory settings for the connected device are loaded and displayed in
to save the factory settings to the connected
Workbook
SpeechControl4Mac 3.3
settings
10 of 28
Page:
of the connected device are
button.
device.