Disconnect From Host And Connect To An Access Point - Honeywell Voyager 1602g Quick Start Manual

successful pairing message and you do not need to continue to
the next step.
4. If your personal computer, laptop, or tablet does not
automatically pair with the scanner, a PIN is displayed. This PIN
must be scanned within 60 seconds. You must quickly scan
Bluetooth PIN Code below, then scan the numeric bar code(s) for
the PIN code from the
bar code.
Your personal computer, laptop, or tablet should now be paired with
the scanner.
Disconnect from Host and Connect to an
Access Point
If your scanner has been connected directly to an iPad, smart
phone, or laptop, you must disconnect it in order to communicate
with an Access Point. Scan the Bluetooth HID Keyboard Discon-
nect bar code to unlink the scanner from the currently linked host.
Scan the linking bar code on the Access Point to relink the scanner.
Programming
Bluetooth PIN Code
Bluetooth HID Keyboard Disconnect
Chart, then scan the Save