Philips HS8420 User Manual page 8

EngliSH
10
1 Make sure there is sufficient shaving
conditioner in the shaving conditioner
cartridge.
2 Press the on/off button to switch on the shaver.
3 Make sure the battery is not low (see chapter
'Preparing for use', section 'Charge indications').
4 Gently move the shaving unit in circles over
your skin and press the shaving conditioner
button until there is enough shaving
conditioner on your skin for a comfortable
shave.
- When you release the shaving conditioner button,
the appliance stops dispensing conditioner.
- Press the shaving conditioner button again to
apply more shaving conditioner during shaving
to ensure that the shaving unit continues to glide
smoothly over your skin.
Note: The shaving conditioner button only works when
the shaver is switched on.
Note: This shaver can be used in a way similar to a
razor blade: you can use the shaver on a wet face.
Unlike a conventional electric shaver, this appliance
has no hair chamber that collects stubble. To prevent
stubble from falling on your clothes, apply sufficient
shaving conditioner while shaving.
5 Thoroughly clean the shaver after every use
(see chapter 'Cleaning').
6 Slide the protection cap onto the shaver to
prevent damage.
Tips for optimal gliding and a smooth
shaving result
- Gently move the shaver in circles over your skin.