System Block Diagram; Operational Flow Chart - Pioneer FX-MG6006 Service Manual

7.3 SYSTEM BLOCK DIAGRAM

FX-MG6006ZH2/X1HUC

7.4 OPERATIONAL FLOW CHART

- ANTI-THEFT OPERATION SPECIFICATION
1. Connect power supply (Before input code Number)
(1) ANTI-THEFT LED is flashing when ACC OFF, +B ON or ACC ON, +B ON, POWER OFF.
(2) If press POWER SW after power supply (ACC and +B) was turned ON, wait for input ANTI-THEFT CODE
NUMBER. ("COdE" is flashing on the LCD.)
2. Input ANTI-THEFT CODE NUMBER
(1) Factory code No. (the key-code of five digits) in advance input.
(2) If input code Number agreed with factory code Number.
• ANTI-THEFT is canceled and BEEP.
(3) If input code Number disagreed with factory code Number.
• Error code indicate.
If input code Number disagreed with factory code Number at 10th times, any key functions are not possible
during 1 hour.
3. Reset
If input code Number disagreed with factory code Number at 10th times, it is initialized by power supply turned OFF
(ACC and +B).
Then power supply (ACC and +B POWER SW) are turned ON again, wait for input ANTI-THEFT CODE NUMBER.
(Please wait until stop the LED flashing.)
+B RELAY
Ex) 1st time "Err1", 2nd times "Err2"..........10th times "ErrE"
+B
BOSE AMP1
SW+B
BOSE AMP2
FX-MG6006ZH2
85