Foreword - Nemtek AGRI Instruction Manual

AGRI
AGRI Solar
The Agri and Agri Solar range of energizers should ideally be operated together with a
Nemtek key-chain remote to gain access to the many energizer settings and
information. The energizer will however operate as a conventional energizer without
the Nemtek remote.
When the energizer settings are changed, using the Nemtek key-chain remote, the
new settings will be retained even when the energizer is disconnected from a power
source for an extended period of time.
This energizer includes a theft deterrent feature. The energizer can be locked to a user
chosen PIN. This PIN is entered and stored within a Nemtek key-chain remote. When
this function is enabled, the energizer is prevented from operating until after a Nemtek
remote, containing the correct PIN, is presented to the energizer. Each time power is
removed and restored to the energizer, the Nemtek remote will need to be presented,
to activate the energizer.
The Agri and Agri Solar range of energizers incorporate our advanced and patented
fence voltage control system, referred to as Adaptive Power Technology or APT. What
this means is the fence energy is maintained at a higher level than would normally be
achievable using a conventional energizer on the same fence, when factors such as
poor or damaged insulators, wet insulators after a rain storm, or salt build up on
insulators (at the coast) prevent the fence from supporting a high voltage. A
conventional energizer will push all available energy through any significant arcing
present on the fence, reducing the fences effectiveness. This energizer, with APT
control active, will detect any significant arcing and attempt to operate the fence at a
voltage just below that at which the arcing occurs, thus maintaining higher energy
levels on the fence and improving the effectiveness of the fence. Nemtek is the
inventor and patent holder of this innovative technology
.
6

Foreword