Page 2
Agri Box Kit: Contents and quantities 1 x Agri Box 3 x Pole Clamps 3 x Reinforcing Plates 3 x Shock Plates 8 x M8 Line Clamp Bolts & Nuts 4 x Grub Screws & Nyloc Nuts 6 x M10 Fence Bolts, Nuts &...
Page 3
Inserting the Agri Energizer into the Agri Box Plant your 2.4m mounting pole into the ground (76mm pole diameter maximum) Place the Agri Box on the ground, open the door and slide out the battery cover Place the energizer into the box and connect...
Page 4
Solar panel bracket Pole Mounting the Agri Box Standard (STD) mounting of the Agri Box onto the pole Shockbox (SB) mounting onto the pole using busbars Bolts through from inside Nuts attached and tightened Inside view Please note: The top of the pole should remain below the solar panel bracket, as shown above...
Connect the battery harnesses to the battery/s Install the bottom battery plate and slide the battery/s into the box Connect the battery plugs to the harness Slide the battery cover into place, close the door and lock it Connection www.nemtek.com...
Bolt the solar panel onto the frame Connect the battery plugs to the harness Please note: For the Shockbox option only Attach the live wire from the energizer terminal to the box as shown www.nemtek.com...
2. Disconnect the Solar Panels: Refer to image O on page 6 WARRANTY Unless otherwise specified all Nemtek energizers have a 2 year warranty and all other fencing components have a 1 year warranty from date of sale against defects due to faulty workmanship or materials.
Need help?
Do you have a question about the Agri Box and is the answer not in the manual?
Questions and answers