Download Print this page
ducduc OSLO CRIB TODDLER RAIL Installation Instructions Manual

ducduc OSLO CRIB TODDLER RAIL Installation Instructions Manual

Advertisement

Quick Links

TODDLER RAIL
installation instructions
for use with the following cribs:
OSLO CRIB
TODDLER RAIL
Thank you for selecting a ducduc for nod product.
This TODDLER RAIL is to be used to convert your
CRIB to a toddler bed. When converting your crib to a
toddler bed, you must use only the TODDLER RAIL
provided.
Please check contents against the components list in
these instructions. Also, please ensure there was no
damage that may have occurred in shipping. If any
components are missing or you find any damage,
please contact The Land of Nod at 800-933-9904
before continuing.
Read all the instructions before use of the TODDLER
RAIL.
Please remember to securely tighten all bolts and
fasteners and periodically check to make sure every
component is properly and securely in place.
Pay close attention to the safety warnings in these
instructions and on CRIB labels.
A minimum of two people is required to safely
assemble and move the CRIB. Do not attempt to move
this CRIB alone - dragging or sliding it across a floor
may cause structural damage.
CAUTION:
The mattress
intended for use on this bed
shall be a full-size crib mattress
having minimum dimensions of
51
in. (1310 mm) in length and
5/8
27¼ in. (690 mm) in width and
4 in. (100 mm) in thickness.
This bed is designed to be used by a child
with a minimum age of 15 months and a
maximum weight of 50 lbs.
Keep instructions for future use.

Advertisement

loading
Need help?

Need help?

Do you have a question about the OSLO CRIB TODDLER RAIL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ducduc OSLO CRIB TODDLER RAIL

  • Page 1 Thank you for selecting a ducduc for nod product. This TODDLER RAIL is to be used to convert your CRIB to a toddler bed. When converting your crib to a toddler bed, you must use only the TODDLER RAIL provided.
  • Page 2 pictures are not drawn to scale TODDLER RAIL RAIL CONNECTOR BOLT (40MM) MATTRESS SUPPORT PANEL (not included) LOCKING WASHER - (1/4”) MATTRESS SUPPORT BOLT (not included) REGULAR WASHER - (1/4”) MATTRESS SUPPORT PIN (not included) LOCKING WASHER - 5/16”) (not included) REGULAR WASHER - (5/16”) ALLEN WRENCH (not included)
  • Page 3 Remove MATTRESS SUPPORT PANEL by unscrewing each of the four MATTRESS SUPPORT BOLTS w ith SCREWDRIVER Determine which side rail should be removed by looking for the open seams near the corners and remove this side rail by unscrewing each of the four RAIL CONNECTOR BOLTS , three BASE CONNECTOR BOLTS , LOCKING WASHERS...
  • Page 4 Align rail connector holes on TODDLER RAIL with the bottom two rail connector holes on the crib. Attach one LOCKING WASHER and one REGULAR WASHER to each RAIL CONNECTOR BOLT and insert four RAIL CONNECTOR BOLTS in rail connector holes. Tighten with ALLEN WRENCH rail connector holes Attach one LOCKING WASHER...
  • Page 5 To install the MATTRESS SUPPO RT PANEL . , insert the smooth ends To install MATTRESS SUPPORT PANEL , insert the smooth ends of each MATTRESS SUPPORT To install MATTRESS SUPPORT PANEL , insert the smooth ends of each MATTRESS SUPPORT of each M ATTRESS SUPPO RT PIN in the lowest matt r ess-support-hole on in the lowest mattress support hole on back panel and TODDLER RAIL...
  • Page 6 Carefully lower MATTRESS SUPPORT PANEL with labels facing up. Align corner holes to sit on MATTRESS SUPPORT PINS corner holes Attach one LOCKING WASHER and one REGULAR WASHER on top of each MATTRESS SUPPORT PIN Secure and tighten each of the four MATTRESS SUPPORT BOLTS to each of the four MATTRESS SUPPORT PINS .
  • Page 7 operation Periodically check to make sure every component is properly and securely in place and all bolts and fasteners are tight. Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag. Rinse and dry thoroughly. If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s furniture.
  • Page 8 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact ducduc for replacement parts and instructional literature if needed. DO NOT substitute parts.