This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1
Main body
3.1.1 Removing the REAR COVER (See Fig.1 to 4)
(1) Remove the two screws A, two screws B, two screws C
and two screws D attaching the REAR COVER. (See Fig1)
(2) Remove the two screws E attaching the both side of REAR
COVER. (See Fig.2)
(3) Disconnect the connector wire from AMP BOARD assem-
bly connected to connector
assembly. (See Fig.3)
(4) Disconnect the connector wire from POWER TRANS-
FORMER connected to connector
BOARD assembly. (See Fig.4)
1-6 (No.MB630)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
SECTION 3
DISASSEMBLY
CN404
of the POWER BOARD
CN401
of the AMP
A
B
D
Fig.1
C