JVC TH-S3 Service Manual page 9

3.1.2 Removing the front panel assembly
(See Figs.5 to 7)
• Remove the metal cover.
(1) From the right side of the DVD mechanism assembly, push
the slide cam and pull the tray assembly out of the main
body in the direction of the arrow. (See Fig.5.)
(2) From the front side of the main body, remove the CD fitting
assembly from the tray assembly in the direction of the ar-
row and push in the tray assembly as before. (See Fig.6.)
(3) From the top side of the main body, disconnect the card
wire from the connector
Fig.5.)
Reference:
When reassembling, connect the card wire to the con-
nector CN428 on the main board after passing it through
the lower part of the holder board. (See Fig.5.)
(4) Disconnect the card wire from the connectors
the HP terminal board. (See Fig.5.)
(5) From the bottom side of the main body, remove the three
screws C attaching the front panel assembly. (See Fig.7.)
(6) From the both and bottom sides of the main body, remove
the front panel assembly in the direction of the arrow while
releasing the engagement sections b and c. (See Fig.7.)
CN428 on the main board. (See
CN454
DVD mechanism assembly
Main board
on
Tray assembly
Front panel assembly
CD fitting assembly
b
c
CN428
Holder board
HP terminal
board
CN454
Card wire
Front panel assembly
DVD mechanism
assembly
Slide cam
Fig.5
Fig.6
C
Front panel assembly
Fig.7
(No.MB187)1-9
b