Table of Contents
Advertisement
Figure 48: CA Screen
7. Click Next if you don't want to change the CA's configuration data.
8. Installation will warn you that Internet Information Services are running, and must be
stopped before continuing. Click OK, then Finish.
DHCP server configuration
1. Click on Start -> Programs -> Administrative Tools -> DHCP
2. Right-click on the server entry, and select New Scope.
Figure 49: DHCP Screen
3. Click Next when the New Scope Wizard Begins.
4. Enter the name and description for the scope, click Next.
5. Define the IP address range. Change the subnet mask if necessary. Click Next.
77
Advertisement
Table of Contents
