Linksys LAPN300 User Manual page 24

Wireless-n300 access point with poe
Hide thumbs Also See for LAPN300:
Table of Contents

Advertisement

Specifies a number between 1 and 4094 for the untagged VLAN ID.
Untagged VLAN
ID
The default is 1. Traffic on the VLAN that you specify in this field is
not be tagged with a VLAN ID when forwarded to the network.
Untagged VLAN ID field is active only when untagged VLAN is
enabled.
VLAN 1 is the default for both untagged VLAN and management
VLAN.
Management
The VLAN associated with the IP address you use to connect to the
VLAN
access point. Provide a number between 1 and 4094 for the Manage-
ment VLAN ID. The default is 1.
IPv4/v6
IP Settings
Select Automatic Configuration or Static IP Address.
IP Address
Enter an unused IP address from the address range used on your LAN.
Subnet Mask
Enter the subnet mask for the IP address above.
Enter the gateway for the IP address above.
Default Gateway
Primary DNS
Enter the DNS address.
Secondary DNS
Optional. If entered, this DNS will be used if the Primary DNS does
not respond.
20

Advertisement

Table of Contents
loading

Table of Contents