Table of Contents
Advertisement
RADIUS
Use RADIUS server for authentication and dynamic WEP key generation for data encryption.
Data - RADIUS Screen
Authentication Server
Primary Server
Primary Server Port
Primary Shared Secret
Backup Server
Backup Server Port
Backup Shared Secret
Figure 23: RADIUS Settings
Enter the IP address of the RADIUS Server on your network.
Enter the port number used for connections to the RADIUS
Server. It is a value from 1 to 65534, and default is 1812.
Enter the key value to match the RADIUS Server. It consists of
1 to 64 characters.
The Backup Authentication Server will be used when the
Primary Authentication Server is not available.
Enter the port number used for connections to the Backup
RADIUS Server. It is a value from 1 to 65534, and default is
1812.
Enter the key value to match the Backup RADIUS Server. It
consists of 1 to 64 characters.
34
Advertisement
Table of Contents
