Table of Contents
Advertisement
If there is no DHCP Server found, the wireless access point will roll back to
an IP address and mask of 192.168.1.252 and 255.255.255.0.
Problem 2:
My PC can't connect to the LAN via the wireless access point.
Solution 2:
Check the following:
•
The SSID and security settings on the PC match the settings on the
wireless access point.
•
On the PC, the wireless mode is set to "Infrastructure"
•
If using the Access Control feature, the PC's name and address is in the
Trusted Stations list.
•
If using 802.1x mode, ensure the PC's 802.1x software is configured
correctly. See Chapter 4 for details of setup for the Windows XP
802.1x client. If using a different client, refer to the vendor's docu-
mentation.
68
Advertisement
Table of Contents
