NTT docomo F-06D STYLE Series Instruction Manual page 19

F-06D_EN_ninshou
FOMA terminal
・
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint
pen and a pin.
- It may damage the touch panel.
・
Avoid extreme temperature.
- Use FOMA terminal where the temperature ranges
between 5 and 40℃ (limited to the temporary use in a
bathroom etc. when temperature is above 36℃) and
humidity ranges between 45 and 85%.
・
FOMA terminal may affect land-line phones, TVs or
radios in use nearby, so use it as far as possible from
these appliances.
・
Maintain a separate record of the data you saved in
your FOMA terminal.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・
Do not drop FOMA terminal or subject it to shocks.
- May cause malfunction or damage.
・
Do not plug external devices into the external
connection jack (earphone/microphone jack) at a
slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
・
Do not close FOMA terminal with the strap etc. held
inside.
- May cause malfunction or damage.
・
It is normal for FOMA terminal to become warm
during use or charging. Continue to use it.
・
Do not leave FOMA terminal with the camera in areas
under strong direct sunlight.
- May cause discoloring or burn-in of elements.
・
Use FOMA terminal with the external connection jack
cap closed.
- Dust and/or water brought into FOMA terminal cause
troubles.
・
Do not use FOMA terminal with the back cover
removed.
- May cause removal of battery pack, malfunction or
damage.
・
Do not put extreme thick sticker on the display or
keypad face.
- May cause malfunction, damage or erroneous
operation.
・
Do not put strong impact on the fingerprint sensor or
scratch its surface.
- May cause malfunction of fingerprint sensor and
disable authentication operation.
・
Clean the fingerprint sensor with a dry soft cloth (such
as a cloth for eyeglasses).
- If the fingerprint sensor is dirty or water is sit on its
surface, the sensor cannot read fingerprints, and it may
cause decrease authentication performance or
malfunction.
・
While microSD card is being used, do not take the
card out and do not turn off FOMA terminal.
- May cause data loss or malfunction.
・
Do not bring magnetic cards etc. close to FOMA
terminal nor clip it by FOMA terminal.
- Magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
・
Do not bring magnetized objects close to FOMA
terminal.
- Bringing strong magnetism close may cause a
malfunction.
17